• Monday, October 08th, 2018
Constructionline Gold accreditation
Balconette is pleased to announce that it has been awarded ‘Constructionline Gold certification’. Constructionline is the UK’s largest register of contractors, consultants and material suppliers for the construction industry.
As a Gold certified company, buyers will now recognise that Balconette fully aligns to industry and government standards, including the relevant Health & Safety compliances, Environmental & Quality Management, Equalities and Diversity, as well as abiding by legislation in areas such as Modern Slavery, Anti-bribery and Corruption, and Equal Opportunities.
Hybrid® balustrading system selected by Balfour Beatty
Following its Gold accreditation, Balconette was quick to secure the contract to supply over 700m of its Hybrid® Glass balustrading system to Balfour Beatty for their upcoming Audley ‘Coopers Hill’ Retirement Village project. The Hybrid® system was selected for its unique aesthetics and ease of installation, as well as its cost-effectiveness. The contract includes the full design, manufacture and installation of the Hybrid® system throughout. Formerly part of Brunel University, Audley ‘Coopers Hill’ is located within the 66 acres of the Magna Carta Park in the village of Englefield Green, near Runnymede in Surrey. The retirement village will include 78 properties and is planned to open in 2019.
• Thursday, September 13th, 2018
Six Important Points to Always Check When Purchasing Glass Balustrades
Here at Balconette we have too often had to replace balustrading products supplied by others which were not fit for purpose or compliant with building regulations. Regardless of whether you choose to purchase from us or not, we want to give you some important tips and pointers to use as a checklist when sourcing and purchasing a balustrading system for your home or development project.
• Thursday, August 02nd, 2018
Designing balustrades to meet wind load requirements is a crucial part of our job. Now, in BS6180:2011 it is required that wind loads are included when designing balustrades.
Where to Find the Relevant Data
There are various factors to take into account when designing for wind loads. In essence, this is covered in a Euro code BS EN 1991-1-4:2005 Actions on structures – Wind actions, its addendum and annex cover what you need to know.
The Euro code 1 itself is a highly scientific and theoretical document of 145 pages and an additional 42 pages in the UK National Annex, giving a total of 187 pages.
• Monday, July 23rd, 2018
Designing Balustrading – 3 Loads You Must Be Aware Of
There are three primary loads to consider when designing glass balustrading to BS6180, which is the code that regulates barriers (Balustrades and Railings).
In this code it specifies the loads for different usages relating to building types or occupancies of buildings.
Although the different occupancy types will specify different loads, for instance in a public environment the load will be higher than for a private residential occupancy, in each occupancy there will always be three loads types that have to be met.
• Monday, November 06th, 2017
Do I Need Planning Permission for a Juliet Balcony?
One of the questions we frequently hear asked is “do I need planning permission for a Juliet balcony?” The answer tends to be no, but there is no straight answer. Read on to understand more about planning regulations for Juliet balconies. A Juliet balcony is not a traditional balcony so planning regulations are more lenient. As you do not need an external platform for the balcony, very little alteration is taking place to your property.
• Sunday, July 16th, 2017
The stunning look that our glass balustrades produce is hard to beat but, because it’s glass, some people have concerns over safety. We’ll also talk about keeping the glass clean.
Keeping the Original Stunning Look
Let’s start by looking at keeping it clean. The aluminium handrails come in different coatings, which in all cases just wipe clean with soap and water. You don’t need any chemicals or abrasive pads as these will damage the coating. This makes our systems much easier to keep clean than Stainless steel systems, which tarnish over time.
• Wednesday, June 16th, 2010
Normal designs of balustrades, or shall we say until Balcony Systems Balustrade system was introduced, have always relied on the strength of posts cantilevering from the floor or relied on the strength of glass clamped at the floor to resist the loads at the top.
This is the traditional and frequently seen solution for balustrades, glass or not.
Resisting the loads
The glass balustrades supplied by balcony systems has broken this routine and introduced a refreshingly innovative approach to resisting the loads. Rather than cantilevering the load and thus needing to design a very rigid base the handrail is designed to take loads direct at the design height.
Fixing the handrail to the falls allow the handrail to work as a rigid element which resists the loads. When corners are introduced the special way the handrail parts are connected and the way the glass is continuously silicone sealed to the glass along the long edge of the glass uses the shearing load of the glass from the handrail right down to the base rail. Again this “out of the box” approach allows for clean glass corners and for cornered balconies to require less posts than ever.
Spreading the resistance across the curve
To top these designs some curved balconies, depending on the radii, are amazingly strong without posts! The curved glass railing is a very stable element to the greater ability of the curve to resist a load by way of spreading the resistance across the curve, similar to a brick arch. In addition the glass itself lends additional horizontal support in a fashion that each curved glass panel cannot bend along the vertical side.
• Tuesday, January 26th, 2010
What pressures or “loads” do railings and balustrades need to withstand and how are these applied, tested or calculated?
Balustrades and railings are put in place with the basic purpose to protect users of buildings, and other areas, mainly from the danger of falling. In order for the railings to do this they must be designed and built not only to resist pressure on them but also impact.
Railings and balustrades pressures and loads »